Trex Seclusions® – Standard Style Gates
All Trex gates (standard & custom) contain a fully welded, galvanized internal steel frame with the same look on each side to match the look of the fence.
Small Panel
Trex Fence Gate Standard Panel
Gate opening: SINGLE: 46 ¼” DOUBLE: 91 ½”
Panel Size: 44 ⅜” x 70 ¼”
Panel Weight: 92 lbs
Large Panel
Trex Standard Large Gate
Gate opening: SINGLE: 65 ¾” DOUBLE: 130 ½”
Panel Size: 63 ⅞” x 70 ¼”
Panel Weight: 125 lbs
The panels described above are also available in custom width and heights.
Trex Gate Description:
Standard style CFC-built gates are intentionally constructed to mimic the look of the fence and are identical visually on both sides. This unique, patent-pending design is built precisely to the dimensions of the Trex materials to ensure all components are tightly interlocked. Our gates are lightweight and durable, and the panels are built with our unique locking mechanism on the outside edges of the panels. Additionally, our custom gate hinges and latch wrap around the edges of the gate providing the utmost strength.
Each gate panel is shipped individually boxed with three gates to a pallet.
Calculating Gate Opening:
Standard gate panels are 70 ¼” tall. They are built for a 72” tall fence allowing a 1 ¾” clearance underneath.
The optimal single gate opening for standard gate panels are 46 ¼” or 65 ¾”. This allows for a 1 ⅞” gap for the hardware (the minimum required allowance is 1 ¼ “; the maximum allowance is 2 ¾”).
The optimal double gate opening for standard gate panels is 91 ½” (for two small panels) and 130 ½” (for two large panels) or 111” (for one small panel and one large panel). This allows for a 2 ¾” gap for hardware (the minimum required allowance is 1 ¾”; the maximum allowance is 4 ¼”).
If the desired gate opening does not fall within the required parameters above a custom gate panel must be ordered. Use these formulas to calculate panel size.
Height: Fence Height – 1 ¾” (for clearance) = Panel Height (for example: 72” – 1 ¾” = 70 ¼”)
Single Gate Width: Gate opening – 1 ⅞” = Panel Size (for example: 40” – 1 ⅞” = 38 ⅛”)
Double Gate Width: (Gate opening – 2 ¾”) ÷ 2 = Panel Size (for example: (120” – 2 ¾”) ÷ 2 = 117 ¼”)
• The suggested gap size is the minimum necessary that will still allow for adjustability.
• To block the view of a gap on the latch and/or hinge posts, a Trex 2×2 should be attached to the gate post on the opposite side of swing.